English 
Русский 
Español 
Français 
Deutsch 
العربية 
描述
其他信息
Reviews (0)
Questions
Description
Description
Leedminer Immersion Cooling for Crypto Mining
——Provide from Home Mining to Large-scale Mining Solutions
Support 6 ASICs inside
Multiple models of Antminer, Whatsminer and Avalon
Smart Adjustment
21kW@38°C/24kW@35°C/28kW@33°C
Effortless
Deployment
and
Independence
- Streamlined design that eliminates the need for secondary heat exchange methods, relying solely on oil circulation.
- A convenient all-in-one configuration, combining a single tank with a dry cooler, requiring only the installation of tubing and wiring.
Advanced
Cooling
Capabilities
- Exceptional cooling performance: 21kW@38℃, 24kW@35℃, and 28kW@33℃.
- Incorporates a standard water mist for enhanced heat dissipation, maintaining efficiency even in environments as hot as 42℃.
Intelligent, Self-
Adjusting
Operation
- Equipped with built-in EC motors that automatically adapt fan speed in response to changes in ambient temperature, ensuring optimal energy efficiency.
C6 Tank Technical Specifications
| Outsize | 1185(L)*530(W)*760(H)mm |
| Insize | 912(L)*404(W)*355(H)mm |
| G.W. | 110kg |
| Coolant Volume | 200L |
| Cycle Mode | Single Loop |
| Input Voltage | Single-Phase 200-240V 50/60Hz |
| Power Usage (Max) | 800-1100W |
| Noise | 45dB(A)@10m |
| Flow | 90L/min |
| Qty of Miner(s) | 6*S19/S21
8*M50/M60 |
| PDU | Single-phase: 220V 125A 6C19
Three-phase: 380V 63A 6C19 |
C6 Dry Cooler specification
| Outer Size | 1680(L)*400(W)*1015(H)mm |
| Input Voltage | Single-Phase 200-240V 50/60Hz |
| Power Usage (Max) | 10-1400W(220V 50Hz) |
| G.W. | 110kg |
| Cooling Capacity | 24kW@35℃ |
| Fluid In / Out | 63-53°C |
| Electrical Interface | C14 *1 |
| Fan Type | EC Fan |
| Noise | 65dB(A)@10m (MAX) |
FAQ
What is the connection method of the C2 power supply?
The mining rigs in C2 is directly connected to the power supply or PDU at home, and the tank and dry cooler are connected through standard C13 connectors.
What is the operating logic of the C2 fan? Can it be adjusted automatically?
Our C2 uses an EC fan to adjust the speed according to the temperature of the oil entering the tank (dry cooler oil temperature).There are 2 modes to choose (the mode is changed by a button inside the waterproof junction box outside the dry cooler).Press the button down is HEATING mode (waste heat utilization mode) 41.3℃ to start the dry cooler, 49.7℃ to maximize the dry cooler speed. Press the button up is NORMAL mode (normal operation mode), 20.5℃ to start the dry cooler, 28.9℃ to maximize the dry cooler speed.
How long is the pipeline for the C2 tank?
We provide two 5m pipeline as standard, and we also support customizing other lengths for a fee.
Will the tank automatically power on after a power outage?
Following a power outage, the tank is unable to initiate an automatic startup and necessitates manual activation by clicking on the screen.
How noisy is the C2 system?
The C2 tank noise about 45dB, the dry cooler will reach 68dB(A) 10m at full speed.
What is the size of the C2 pump?
With an input voltage of 220V 50Hz, the pump has a power of 150W, and the maximum flow rate for circulating the Coolant is 36L/min, with a maximum head of 10m.
What is the C2 pipeline connector size?
C2 pipeline connector size is DN25 (External thread diameter Pipeline diameter 32mm).
What should you do if there is high-frequency noise in the junction box when the fan is running at full speed?
In general, this issue might arise due to the loose fastening of screws on the internal PCB board of the junction box. You should dismantle the junction box and tighten the screws securely. If the screws cannot be tightened, you can try to replace the screws or add gaskets to tighten the screws (M3 screws and gaskets). If the problem persists, you can try to add gaskets (preferably rubber anti-vibration pads) at the bottom of the dry cooler to raise the fan to prevent noise caused by contact between the bottom of the dry cooler and the ground.
How to properly unload oil to avoid waste?
First, pump the oil out using the oil filling pump in the accessories. At the same time, there is an oil discharge port in the middle of the liquid separator plate at the bottom of the tank. After removing the screw, plug the oil filling pump in to clean up the liquid at the bottom of the liquid separator plate.
How does the oil filling pump work in accessories?
Instructions1. Connect the pump to the inlet and outlet pipes: Ensure a tight seal between the pipes and the pump to prevent low pressure or leakage. The arrow on the pump head indicates the direction of the outlet.2. Put the water inlet pipe below the coolant level, and put the water outlet pipe in the corresponding storage coolant receptacle.3. Connect the pump to the pump power adapter and then power on.
What is the material of C2 kit?
The material of C2 tank is cold-rolled steel , the dry cooler is copper and aluminum fins.
If the C2 pump stops or reports an error, what will happen?
If the pump stops working, a “Pump Error” prompt will appear on our Tank’s display screen, accompanied by an alarm sound. If this situation is not addressed, the temperature of the coolant will continue to rise due to the inability to dissipate heat. Eventually, this will trigger the temperature protection mechanism of the mining rigs, causing them to stop operating automatically.
Note
About the transportation of liquid cooling equipment
For most areas, the liquid cooling equipment will be shipped to you via sea freight. Ports and receiving points in different regions will incur different shipping charges. It is recommended that you contact customer service to confirm address details and calculate shipping costs before placing an order.
Advisory Service
Please send us your RFQ to get your exclusive sales manager assistance.
Additional information
| Options | C6 Tank, C6 Tank + Dry cooler, C6 Tank + Dry cooler + Coolant |
|---|
There are no question found.
Immersion Cooling C6
Minable coins:
$1100.00 – $4349.00
Please confirm the current inventory and pricing with customer service before placing your order, as prices may fluctuate.
Lifetime Customer Support
Direct Supplies Price
Fast shipping
Manufacturers Warranty
Bundle Discounts
PSU Included
Profitability
| Week | Month | 3 Months | Year |
|---|
未找到算力或算法数据。请确保已在产品元数据中设置它们。
Description
Description
Leedminer Immersion Cooling for Crypto Mining
——Provide from Home Mining to Large-scale Mining Solutions
Support 6 ASICs inside
Multiple models of Antminer, Whatsminer and Avalon
Smart Adjustment
21kW@38°C/24kW@35°C/28kW@33°C
Effortless
Deployment
and
Independence
- Streamlined design that eliminates the need for secondary heat exchange methods, relying solely on oil circulation.
- A convenient all-in-one configuration, combining a single tank with a dry cooler, requiring only the installation of tubing and wiring.
Advanced
Cooling
Capabilities
- Exceptional cooling performance: 21kW@38℃, 24kW@35℃, and 28kW@33℃.
- Incorporates a standard water mist for enhanced heat dissipation, maintaining efficiency even in environments as hot as 42℃.
Intelligent, Self-
Adjusting
Operation
- Equipped with built-in EC motors that automatically adapt fan speed in response to changes in ambient temperature, ensuring optimal energy efficiency.
C6 Tank Technical Specifications
| Outsize | 1185(L)*530(W)*760(H)mm |
| Insize | 912(L)*404(W)*355(H)mm |
| G.W. | 110kg |
| Coolant Volume | 200L |
| Cycle Mode | Single Loop |
| Input Voltage | Single-Phase 200-240V 50/60Hz |
| Power Usage (Max) | 800-1100W |
| Noise | 45dB(A)@10m |
| Flow | 90L/min |
| Qty of Miner(s) | 6*S19/S21
8*M50/M60 |
| PDU | Single-phase: 220V 125A 6C19
Three-phase: 380V 63A 6C19 |
C6 Dry Cooler specification
| Outer Size | 1680(L)*400(W)*1015(H)mm |
| Input Voltage | Single-Phase 200-240V 50/60Hz |
| Power Usage (Max) | 10-1400W(220V 50Hz) |
| G.W. | 110kg |
| Cooling Capacity | 24kW@35℃ |
| Fluid In / Out | 63-53°C |
| Electrical Interface | C14 *1 |
| Fan Type | EC Fan |
| Noise | 65dB(A)@10m (MAX) |
FAQ
What is the connection method of the C2 power supply?
The mining rigs in C2 is directly connected to the power supply or PDU at home, and the tank and dry cooler are connected through standard C13 connectors.
What is the operating logic of the C2 fan? Can it be adjusted automatically?
Our C2 uses an EC fan to adjust the speed according to the temperature of the oil entering the tank (dry cooler oil temperature).There are 2 modes to choose (the mode is changed by a button inside the waterproof junction box outside the dry cooler).Press the button down is HEATING mode (waste heat utilization mode) 41.3℃ to start the dry cooler, 49.7℃ to maximize the dry cooler speed. Press the button up is NORMAL mode (normal operation mode), 20.5℃ to start the dry cooler, 28.9℃ to maximize the dry cooler speed.
How long is the pipeline for the C2 tank?
We provide two 5m pipeline as standard, and we also support customizing other lengths for a fee.
Will the tank automatically power on after a power outage?
Following a power outage, the tank is unable to initiate an automatic startup and necessitates manual activation by clicking on the screen.
How noisy is the C2 system?
The C2 tank noise about 45dB, the dry cooler will reach 68dB(A) 10m at full speed.
What is the size of the C2 pump?
With an input voltage of 220V 50Hz, the pump has a power of 150W, and the maximum flow rate for circulating the Coolant is 36L/min, with a maximum head of 10m.
What is the C2 pipeline connector size?
C2 pipeline connector size is DN25 (External thread diameter Pipeline diameter 32mm).
What should you do if there is high-frequency noise in the junction box when the fan is running at full speed?
In general, this issue might arise due to the loose fastening of screws on the internal PCB board of the junction box. You should dismantle the junction box and tighten the screws securely. If the screws cannot be tightened, you can try to replace the screws or add gaskets to tighten the screws (M3 screws and gaskets). If the problem persists, you can try to add gaskets (preferably rubber anti-vibration pads) at the bottom of the dry cooler to raise the fan to prevent noise caused by contact between the bottom of the dry cooler and the ground.
How to properly unload oil to avoid waste?
First, pump the oil out using the oil filling pump in the accessories. At the same time, there is an oil discharge port in the middle of the liquid separator plate at the bottom of the tank. After removing the screw, plug the oil filling pump in to clean up the liquid at the bottom of the liquid separator plate.
How does the oil filling pump work in accessories?
Instructions1. Connect the pump to the inlet and outlet pipes: Ensure a tight seal between the pipes and the pump to prevent low pressure or leakage. The arrow on the pump head indicates the direction of the outlet.2. Put the water inlet pipe below the coolant level, and put the water outlet pipe in the corresponding storage coolant receptacle.3. Connect the pump to the pump power adapter and then power on.
What is the material of C2 kit?
The material of C2 tank is cold-rolled steel , the dry cooler is copper and aluminum fins.
If the C2 pump stops or reports an error, what will happen?
If the pump stops working, a “Pump Error” prompt will appear on our Tank’s display screen, accompanied by an alarm sound. If this situation is not addressed, the temperature of the coolant will continue to rise due to the inability to dissipate heat. Eventually, this will trigger the temperature protection mechanism of the mining rigs, causing them to stop operating automatically.
Note
About the transportation of liquid cooling equipment
For most areas, the liquid cooling equipment will be shipped to you via sea freight. Ports and receiving points in different regions will incur different shipping charges. It is recommended that you contact customer service to confirm address details and calculate shipping costs before placing an order.
Advisory Service
Please send us your RFQ to get your exclusive sales manager assistance.
Immersion Cooling C6 operates using the algorithm, capable of achieving a maximum hash rate of with a power consumption of just . It is recognized for its impressive energy efficiency of . Additionally, it features a noise level of .
Immersion Cooling C6 is a modern miner for , optimized for the algorithm. Manufactured by , it weighs and has dimensions of . The cooling mode utilized is Cooling, ensuring efficient thermal management. The miner interfaces through , making it user-friendly and adaptable for various setups.
The atmospheric temperature for optimal performance is .
Immersion Cooling C6 is a modern miner for , optimized for the algorithm. Manufactured by , it weighs and has dimensions of . The cooling mode utilized is Cooling, ensuring efficient thermal management. The miner interfaces through , making it user-friendly and adaptable for various setups.
The atmospheric temperature for optimal performance is .
Specifications
| Model | Coin | Hashrate | Power | Efficiency | Earning 24H | Daily Electricity Cost | ShutDown Price | Miner Price | PayBack (Days) |
Net Profit Per Day |
|
|---|---|---|---|---|---|---|---|---|---|---|---|
Aethir Edge ATH Miner
Delivery Time:
In-stock
|
|
100
ATH
|
18
W
|
N/A
|
$8.00
|
-$-0.02
|
$ |
$1,299 12.99 $/ATH |
163 |
$7.98
|
Terms
All orders are dispatched in batches, with machines shipped within 3-7 days from stock; bulk orders may require an additional day or two. We aim to ship promptly via DHL Express, UPS, Fedex, or TNT after confirming full payment (wire transfers may take 3-7 business days, while cryptocurrency payments are usually verified within a few hours to 1 business day).
International shipping generally takes 5-8 business days, and DDP shipping can take 8-10 days.
*Please note that all sales are final and non-refundable.
Accepted payment methods:
1. Bank transfer/Wire transfer (T/T)
2. USDT
3. For other methods, please consult our sales expert.
*All machine price is fluctuating based on the crypto market so our quotes are only valid on the day of publication.*
We primarily ship via DHL Express, UPS, or FedEx. For certain countries, we offer DDP (Delivery Duty Paid) shipping, meaning clients do not incur any duties or customs charges.
DDP Shipping Countries: United States, Germany, Russia, Dubai, United Kingdom, France, Belgium, Luxembourg, Netherlands, Denmark, Czech Republic, Poland, Austria, Ireland, Portugal, Sweden, Spain, Vietnam, Thailand, Malaysia, as well as Indonesia, the Philippines, Canada, and the entire European Union (note: some countries require a minimum order of 30kg).
To request DDP shipping, please contact us at [email protected]
For non-DDP countries or standard shipping, we can help reduce your tax by issuing a lower invoice.
*Our products exclude all value-added taxes and customs duties, and you will be responsible for paying any applicable taxes and duties according to your country’s laws. Additionally, if any miner needs to be returned to Hong Kong, the client will cover the extra shipping costs.
We offer:
1. Marketing Photos and Video Package
2. Competitive Wholesale Prices
3. Support Dropshipping Service
4. Technical Support
All orders are dispatched in batches, with machines shipped within 3-7 days from stock; bulk orders may require an additional day or two. We aim to ship promptly via DHL Express, UPS, Fedex, or TNT after confirming full payment (wire transfers may take 3-7 business days, while cryptocurrency payments are usually verified within a few hours to 1 business day).
International shipping generally takes 5-8 business days, and DDP shipping can take 8-10 days.
*Please note that all sales are final and non-refundable.
Accepted payment methods:
1. Bank transfer/Wire transfer (T/T)
2. USDT
3. For other methods, please consult our sales expert.
*All machine price is fluctuating based on the crypto market so our quotes are only valid on the day of publication.*
We primarily ship via DHL Express, UPS, or FedEx. For certain countries, we offer DDP (Delivery Duty Paid) shipping, meaning clients do not incur any duties or customs charges.
DDP Shipping Countries: United States, Germany, Russia, Dubai, United Kingdom, France, Belgium, Luxembourg, Netherlands, Denmark, Czech Republic, Poland, Austria, Ireland, Portugal, Sweden, Spain, Vietnam, Thailand, Malaysia, as well as Indonesia, the Philippines, Canada, and the entire European Union (note: some countries require a minimum order of 30kg).
To request DDP shipping, please contact us at [email protected]
For non-DDP countries or standard shipping, we can help reduce your tax by issuing a lower invoice.
*Our products exclude all value-added taxes and customs duties, and you will be responsible for paying any applicable taxes and duties according to your country’s laws. Additionally, if any miner needs to be returned to Hong Kong, the client will cover the extra shipping costs.
We offer:
1. Marketing Photos and Video Package
2. Competitive Wholesale Prices
3. Support Dropshipping Service
4. Technical Support
Frequently asked questions
How much does Immersion Cooling C6 make ?
As of Dec 21, 2024, considering an electricity cost of $0.04/KWh, the Immersion Cooling C6 has the following profit calculations:
- Daily Net Profit: $0
- Monthly Net Profit: $0
- Yearly Net Profit: $0
How to set up Immersion Cooling C6 ?
1. Keep in a Protective and Ventilated Area
Select the case’s appropriate size, preferred colour, and preferred style to go with the decor of your space. Keep your Immersion Cooling C6 on a protective frame, open all sides for adequate airflow and install fans for more ventilation. Ventilation is the most important thing for mining hardware to deliver better. To create a well-ventilated inside and out, install fans as per requirement and use foaming or wooden frames.
2. Connect it to the Power Supply and Internet Connection
You must now connect your mining equipment to an electricity source. We are all aware that the primary need for cryptocurrency miners is energy. It is when you connect your miner to the power source that your miner gets the power to initiate. Connect your Immersion Cooling C6 to the internet connection, is interface for Immersion Cooling C6. Ensure it is connected to the internet.
3. Get an IP Address and Authorize Your Immersion Cooling C6
There are two ways to get an IP address: you can choose any of the two options at your convenience. The first option is the DHCP address by logging into the home router and filling in all the details. The other option is to install some free mining software and grab the IP address from there. Once done, paste the IP address on a new webpage and enter the credentials, such as your username and password, to authorize it.
4. Join and Set Up a Mining Pool
Entering a pool will improve your chances of receiving payments more frequently and consistently by rewarding you with small amounts of coin whenever all pool members complete an algorithm. A pool is a collection of cryptocurrency miners who cooperate and pool their hashing capacity to solve equations across the network. Once you have joined the pool, set it up per your mining requirements.
5. Set Up a Wallet
Multiple wallets, such as software or hardware wallets, are available online. Follow all the instructions on the official website of the crypto exchange or crypto wallet you choose. Then, you can use your wallet address as a method of payment to accept coins.
6. Configure Your Immersion Cooling C6
The next step is to set up your miner by filling in all the essential details in the interface that appears when you log in using the credentials provided. Fill in the details such as owner’s accounts, mining pool details, addresses, wallet addresses and other required fields.
7. Start Mining
Now that your Immersion Cooling C6 setup process is complete, you can start mining coins. Just be sure to launch the miner with a greater hash rate. Your Immersion Cooling C6 is now set up and running, and you can anticipate seeing a return on your investments.
8. Determine Profits and Assess Miner’s Activity
Now that your setup is complete and you have started mining , it’s crucial to analyze how well it performs compared to your expenses and keep a keen eye on the working of your Immersion Cooling C6.
RELATED PRODUCTS
COMPANY partnerS
You’re in good company, Supported by the world’s best.
Social Partners
We’re excited to announce our partnership with Rabidming Trades! This collaboration will bring you the latest innovations in crypto mining, providing you with the best equipment and expert insights to stay ahead of the curve.
Geek Of All Trades is your go-to source for crypto mining expertise. Explore their YouTube channel for in-depth videos on ASIC, GPU, and FPGA mining, and gain the knowledge you need to thrive.
CoinGabbar is a cryptocurrency platform that offers a range of features and services, such as price tracking and market analysis tools.
The platform has news and blog sections with articles about the latest info and developments from the cryptocurrency world.
Coinpaper is a rapidly developing online magazine that focuses on topics like cryptocurrency and blockchain technology.
The platform provides on-topic news, reports, analysis, guides, and other relevant resources for entry-level and experienced crypto users.
Asic Miner Supplier
Subscribe to email
Request inventory & stock list Get the weekly Leedminer miner price list and inventory availability.
Rating & Review
There are no reviews yet.